| ARCADEPARADISE.ORG |

Parts List

Console Box:

• Radio Shack, part # 27-216 - 8" x 6" x 3" Control Console Enclosure

 

Interface:

• Hagstrom Electronics LP24 Keyboard Encoder

 

Wiring / Cabling:

• Radio Shack, part # 276-1548B - 25-Position Female D-Subminiature Solder-Type Connector
• Radio Shack, part # 276-1536A - Shielded Metallized Hood for 25-position D-subminiature connector
• Radio Shack, part # 274-670 - 8-Position Dual-Row Barrier Strip

(A standard 25-pin male to 25-pin male parallel through-cable is used to connect the Console Box to the Encoder Box. All wiring inside the Console Box was done using 24-AWG solid wire.)

Console Buttons:

• Happ Controls, part # 58-91xx-L - Pushbutton With Horizontal Microswitch (assorted colors)

 

Hand Buzzers:

• Radio Shack, part # 275-609A - SPST Momentary Pushbutton Switches
• Radio Shack, part # 42-2434 - Shielded 6-Ft. Audio Cable (1/8" mini plug to tinned ends)
• Radio Shack, part # 274-251C - Two-Conductor 1/8" Mini Phone Jacks

 

©1999-2004 arcadeparadise.org. Please see the "About" page for more details on copyright notification, the site disclaimer, and the privacy policy.

Arcadeparadise.org will look best at a minimum of 800x600 at true color, and on a real browser.